Easy Ways to Get Rid of Fungus on Car Windshield

Frosted on the car windshield because of a lot of dirt or fungus that sticks will certainly disturb the view. In fact, at night, the driver’s view is blocked. The result is fatal.
The causes of mold on the windshield are various. In addition to the fact that the car is often parked in a humid place, dirt, or dust that sticks to it and is not immediately cleaned also triggers the fertility of mold on the windshield.
Therefore, cleaning the car, especially the windshield is highly recommended. Only, to bring the car to the car repair shop every day also feels heavy. Aside from the expensive fees, the owners also don’t necessarily have the time. You can call the windshield repair phoenix for the best car windshield service.
But don’t worry. If you do not have time to get to the car garage, you can clean the fungus and stains on the windshield yourself. The method is easy and the materials and tools needed are also simple.
In other words, this method is very easy and inexpensive. The results are satisfying, not inferior to a car repair shop.
So, what are the equipment or materials? How to do it. Here are the tips:
#1. Use Soda
You certainly often see or even ever consume joyful soda drinks. Now, to clean mold in stubborn windshield we need soda, remember only soda.
However, before cleaning the fungus or stain, clean the moldy or stained windshield. But remember, don’t flush water. It was intended that the chemical elements in soda drinks do not compound with water.
Because when it is mixed with water, then the element will break down so that it doesn’t work anymore.
After the windshield is cleaned, the cleaning process can begin. The trick is to take a clean, dry cloth, then wet it with liquid or soda and rub it. Repeat this method several times until the stain or fungus disappears.
#2. Flush with Tobacco Water
Another quite effective way to get rid of stains or mold on the windshield is to use tobacco water. The trick, take a handful of dry tobacco and then low in a jar of clean water.
Remember, make sure the water does not mix with soap or detergent and various other substances. Use cold water that has not been boiled. Soak the tobacco for 10 -15 minutes.
While waiting for the tobacco bath, clean the windshield of the car to be cleaned. Use cold clean water. Make sure the water used is not mixed with soap, detergent, or other substances.
After the windshield is doused with water and dry enough, flush with tobacco soaking water and then rub it with dry, clean foam. Do it repeatedly until the windshield mold disappears, and rinse the windshield with clean water.
#3. Take Precautions
To prevent mold or stains on the windshield, you should immediately flush or wash the car, especially the windshield shortly after the car was rain. If, do not have time to wash or flush with water, clean the windshield with a dry feather duster or wipe with a wet chamois cloth.
Try not to park in areas that are directly exposed to direct sunlight. The reason, ultraviolet radiation can make dirt – especially liquid – stick strongly. In fact, if not cleaned immediately the dirt will experience oxidation and turn into mold.